RSS

Tag Archives: Industrial and Hazardous Waste Management

Industrial and Hazardous Waste Management

Unit VI Project

need by tomorrow pay close attention to the different heading on peoject vi and project vIII

As a continuation of our course project due in Unit VIII (A Proposal for an Industrial and Hazardous Waste Treatment Facility), complete the next (sixth) section (solid waste treatment) of your proposal by following the instructions carefully, and then submit your continued draft of your proposal into Blackboard for grading.

Instructions:

1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit V and make any improvements to your draft using your professor’s feedback from the Unit V project assignment. 3. Open the Unit VI Study Guide, read the unit lesson, and then work with the embedded interactive model to decide what solid waste treatment equipment to include in your treatment process design.

MEE 5801, Industrial and Hazardous Waste Management 5

4. Continue from your Unit V Project and make your sixth level one heading titled “Solid Waste Treatment.” Describe the solid waste treatment equipment that you engineered into your treatment process (sludge dewatering equipment). Be sure and describe the relevance and anticipated reduction of related analytical concentrations within your industrial and hazardous waste treatment system as they correspond with each technology that you selected.

You are required to describe the equipment selection in at least one page.

Information about accessing the Blackboard Grading Rubric for this assignment is provided below.

As a continuation of our course project due in Unit VIII (A Proposal for an Industrial and Hazardous Waste Treatment Facility), complete the next (sixth) section (solid waste treatment) of your proposal by following the instructions carefully, and then submit your continued draft of your proposal into Blackboard for grading.

Instructions:

1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit V and make any improvements to your draft using your professor’s feedback from the Unit V project assignment. 3. Open the Unit VI Study Guide, read the unit lesson, and then work with the embedded interactive model to decide what solid waste treatment equipment to include in your treatment process design.

MEE 5801, Industrial and Hazardous Waste Management 5

4. Continue from your Unit V Project and make your sixth level one heading titled “Solid Waste Treatment.” Describe the solid waste treatment equipment that you engineered into your treatment process (sludge dewatering equipment). Be sure and describe the relevance and anticipated reduction of related analytical concentrations within your industrial and hazardous waste treatment system as they correspond with each technology that you selected.

You are required to describe the equipment selection in at least one page.

Information about accessing the Blackboard Grading Rubric for this assignment is provided below.

Unit VIII Course Project

As the final and complete step of our course project (a proposal for an industrial and hazardous waste treatment facility), complete the last (seventh) section (cake solids disposal) of your proposal by following the instructions carefully. Draft a one paragraph abstract (insert the abstract immediately following the title page), and then submit your final copy of your completed proposal into Blackboard for grading.

Instructions:

1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit VI and make any improvements to your draft using your professor’s feedback from the Unit VI project assignment. 3. Open the Unit VIII Study Guide, read the unit lesson, strongly consider reading the article referenced in the suggested reading section, and then consider your filter cake disposal strategies available to you and your client. 4. Continue with your Unit VI Project and make your seventh level one heading titled “Cake Solids Disposal.” Describe the waste profiling process, the process of locating an appropriate site of final disposition for the filter cake, contracting with a landfill, and the paperwork associated with final disposal. You are required to describe the entire filter cake disposal process in at least one page. 5. Throughout the course you have continued to add pieces to the course project. After you have added the “Cake Solids Disposal” component to the project, review your project to be sure you have included all components from the course and incorporated feedback from the instructor. Along with the title page and reference list, create a one paragraph abstract following the title page that summarizes the entire project.

 

Unit VIII Course Project

As the final and complete step of our course project (a proposal for an industrial and hazardous waste treatment facility), complete the last (seventh) section (cake solids disposal) of your proposal by following the instructions carefully. Draft a one paragraph abstract (insert the abstract immediately following the title page), and then submit your final copy of your completed proposal into Blackboard for grading.

Instructions:

1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit VI and make any improvements to your draft using your professor’s feedback from the Unit VI project assignment. 3. Open the Unit VIII Study Guide, read the unit lesson, strongly consider reading the article referenced in the suggested reading section, and then consider your filter cake disposal strategies available to you and your client. 4. Continue with your Unit VI Project and make your seventh level one heading titled “Cake Solids Disposal.” Describe the waste profiling process, the process of locating an appropriate site of final disposition for the filter cake, contracting with a landfill, and the paperwork associated with final disposal. You are required to describe the entire filter cake disposal process in at least one page. 5. Throughout the course you have continued to add pieces to the course project. After you have added the “Cake Solids Disposal” component to the project, review your project to be sure you have included all components from the course and incorporated feedback from the instructor. Along with the title page and reference list, create a one paragraph abstract following the title page that summarizes the entire project.

 
Leave a comment

Posted by on March 19, 2018 in academic writing

 

Tags:

Industrial and Hazardous Waste Management

Question 1       

  1. Discuss the waste profiling process using the laboratory report as a metric of the industrial and hazardous waste treatment system’s effectiveness. Be sure and describe any suggested engineering considerations that would be necessary in order to improve the system as it relates to reducing hazardous solid waste (such as filter cake).

    Your response should be at least 200 words in length NEED REFERENCE AFTER EACH QUESTION

Question 2       

NEED B TUESDAY

  1. Discuss the landfill coordination and acceptance of solid waste generated from the industrial and hazardous waste treatment process (to include the filter cake). Be sure and include the manifest paperwork, personnel training, and other important aspects of transporting and disposing of the solid waste into a landfill in your discussion.

    Your response should be at least 200 words in length.  NEED REFERENCE AFTER EACH QUESTION

 
Leave a comment

Posted by on March 19, 2018 in academic writing

 

Tags:

Industrial and Hazardous Waste Management

Need by tomorrow

Question 1       

  1. Discuss liquid effluent management strategies related to a sewer cleanout of a petrochemical facility.

    Your response should be at least 200 words in length. REFERENCE AFTER EACH  QUESTION

Question 2       

  1. Discuss liquid effluent management strategies related to chemical cleaning operations within an oil refinery facility.

    Your response should be at least 200 words in length. REFERENCE AFTER EACH  QUESTION

Question 3       

  1. Discuss the process for characterizing cake solids derived from a liquid treatment process as being either hazardous or non-hazardous.

    Your response should be at least 200 words in length. REFERENCE AFTER EACH  QUESTION

Question 4       

  1. Discuss the relevance of the analytical testing methods as they relate to modeling waste behaviors in a landfill.

    Your response should be at least 200 words in length. REFERENCE AFTER EACH  QUESTION

 
Leave a comment

Posted by on March 13, 2018 in academic writing, Academic Writing

 

Tags: